SeaDoo GTI LE RFI Manuel d'utilisateur télécharger pdf (Page 6)



WARNING

Fuel is flammable and explosive under certain

conditions. Always work in a well ventilated

area. Do not smoke or allow open flames

or sparks in the vicinity. Fuel tank may be

pressurized, turn cap slowly when opening.

When fueling, keep watercraft level. Do not

overfill or top off the fuel tank and leave

watercraft in the sun. As temperature increases,

fuel expands and might overflow. Always

wipe off any fuel spillage from the watercraft.

Periodically inspect fuel system. Always turn the

fuel tank valve (if so equipped) to OFF position

when storing the watercraft.

Model(s): Carburetor-Equipped

Always turn the fuel valve to OFF position when

storing the watercraft.

COOLING SYSTEM

FLUSHING AND ENGINE

INTERNAL LUBRICATION

Cooling system has to be flushed with fresh water

to prevent salt, sand or dirt accumulation which will

clog water passages.

Engine must be lubricated to prevent corrosion on

internal parts.

For proper procedure, refer to FLUSHING AND

LUBRICATION in Shop Manual.

F22J01A

: On the 3D RFI, the hose adapter [

[[

[1]

]]

]is

locatedontherighthandsideonthejetpump

support.

6 / 20 2004-19 Service

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Pas de commentaire

SeaDoo GTI LE RFI Manuel d'utilisateur Page 6